MERRY CHRISTMAS

CHRISTMAS CRAFT

CHRISTMAS TREE DECORATIONS

PAPER WEAVE HEART

DOVE

EGG SHELL SANTACLAUS


MATERIALS REQUIRED
• Egg shell
• Cotton
• Foundation or Rose powder
• Red Varnish paper
• Black and red sticking Bindi
• Glue (Fevicol) or zello tape
PROCEDURE
• Take the eggshell carefully without breaking, by making a small hole at one end and remove the contents.
• Apply rose powder or foundation to the egg shell to give it a rosy look. Then take cotton and cut it in the shape of a beard, one narrow strip (pressed in the middle) for the moustache and two small narrow strips for eyebrows. Stick them in place using glue and some cotton for hair at the sides.
• For cap- Take a piece of red varnish paper and make a cone out of it, stick this over the egg shell with glue or by sticking tape at the back. For eyes use stick small black round papers or bindis and for nose a small round or oval red varnish paper.
• Make two small holes at the back of the cap on top, pass a string through the holes for hanging. You can hang the Santa on Christmas trees.

SNOWFLAKES
Dancing Girls




MATERIALS REQUIRED
Paper, scissors,thread
PROCEDURE
Take a square paper and fold it into half to make it into a triangle
• Now fold along the dotted lines
• Turn over and again fold along the dotted lines
• Now fold it into half . This is the basic shape and u can draw anything and cut out to get different shapes of snowflakes
• Cut along the lines with the help of a scissor.
• These can be hung on the Christmas tree or the window.

AN ORIGAMI STAR
BACKSIDE OF THE STAR

STEP:1,2,3

STEP:4,5

STEP:6


A STAR
INSTRUCTIONS


PORCUPINE BALLS

MATERIALS REQUIRED
Colour papers, Scissors, Cardboard, Thread
PROCEDURE
Porcupine balls are a decorative technique which originated in Poland. These balls made in different colours were traditionally used to decorate the Christmas tree. Tissue paper, cut in round shapes can be assembled to make porcupine balls and they can be hung as such from Christmas trees or can also be hung in a mobile, or tissue paper can be cut in graduated sizes and assembled into a Christmas tree.
Cut out circles from different colour papers
Make eight cuttings from the edges of each circle.
Make a small cone from a thicker paper or cardboard. Cover the cone with clear plastic adhesive (cello tape) to prevent the tissue paper from sticking on to it.
Wrap each of the eight flaps of the rounds over the tip of the cone and apply glue with a brush to secure the flaps.
Take the cone out and continue with the next flap. We will get star like shapes. These star shapes can be used to assemble porcupine balls
Make a hole in the center of the star shapes, pass a thread or a flexible thin metal wire through the hole of the shapes and also through a small round piece of cardboard to prevent tearing.
Pull and tie the thread or the metal wire ends firmly and the pointed end will spread naturally into a ball.
Colour paper can be cut in graduated sizes and assembled into a Christmas tree.
We need a rod fixed with a base to assemble the Christmas tree.
Length of the rod can depend on the height of the Christmas tree you are planning to make.
Make a hole in the center of the star shapes and stick on gummed reinforcements to strengthen the center.
Insert the shapes one by one, with the wider diameters first and then the smaller ones until the tree gets the required shape
Insert a gold or silver ball at the top. Glue in coloured or silver or gold small balls to the tips of the shapes as decorations

3-D SNOWFLAKES

MATERIALS REQUIRED
Pencil, Paper, Scissors, Poster paint, tape, glue, glitter, thread
PROCEDURE
Apply paste in the corners and make the paper into cylindrical shape (A tube)
Draw an inch-wide band around the center of the paper tube
Draw six evenly spaced lines from each end of the tube to the band, then cut along them
If you want paint the paper in white colour both inside and outside
Tape the ends of the strips from one side of the band to those from the other side
Snip triangles from the edges of the strips. Add glue and glitter spots or beads for decoration. Use thread to hang up the snowflake

CHRISTMAS TREE

PAPER CHRISTMAS TREE
Make a simple 3-dimensional Christmas tree from construction paper. These trees look great sitting on the mantle or on a windowsill
MATERIALS REQUIRED
• Green construction paper
• Crayons, markers, glitter glue, or tempera paint
• Scissors
• Clear tape
• Optional: Other colors of construction paper, glue, hole punch, stickers
PROCEDURE
• Fold a piece of green construction paper in half, then cut it in half.
• Put the two pieces together, and fold them in half again.Draw half a Christmas tree opposite the fold
• Cut along the line - you should get two identical trees.
• Fold the trees in half, just barely creasing the center line (this is to mark the center of the tree).
• Cut a slit along the bottom half of the center of one tree and along the top half of the center of the other tree.
• Slip the two trees together along the slits.
• Using clear tape, tape the bottoms and tops together (pieces of tape on the bottom and at the top make the tree stand up well and stop the slit ends from flopping over).
• Decorate your tree with crayons, markers, glitter glue, or tempera paint. Or you can glue on tiny construction paper decorations or use star stickers. You can cut out tiny paper balls using a hole punch.
• Now you have a really nice 3-dimensional Christmas decoration.
• Optional: cut out a small construction paper star and cut a tiny slit in it. Put the star on the top of the tree (and secure it with some tape).
For a bigger tree: Start with two pieces of green construction paper, and fold them so they make a long, thin rectangle. Draw a tree opposite the fold. The rest of the instructions are the same

PAPER CUP CHRISTMAS TREE

MATERIALS REQUIRED
Paper cup, Scissors, A balloon stick or anyother stick, Pencil, Rubberband
PROCEDURE
• Measure 0.5cm from the rim of the cup and draw around it
• Increase the measurement of the other cups by 0.5cm, that is the second cup will be 1cm, 3rd will be 1.5cm and so on.
• Lable the cups with the tallest as 1 and the shortest as 1.
• Cut the cups into srips and don’t worry about the thickness. Irregular thickness looks nicer.
• Curl the strips with the help of a pencil. Use smaller objects to have thin full curls. Do this to all the cups
• Now pierce all the cups in the center. Now insert the cups one by one into the balloon stick
• Tie a rubber band around the stick as stopper so that the cups wont slip
• Pierce the top of the stick through the cup with the base facing outwards, starting from no.10, leaving a bit of space inbetween 2 cups.
• Now pierce a paper cup and insert the stick on to the cup, which serves a base for the tree to stand
• Now the Christmas tree is ready for decoration.

GLASS PAINTING

GLASS PAINTING
The first picture i tried on glass was a cartoon....I was very much attached to this cartoon that i always tried it with new materials i come across. I first did it with water colour on paper when i was in my 6th grade, then in chart paper with poster colours when i was in my 10th grade and i tried on glass during my college days...
It was my best friend’s birthday and I wanted to give her a valuable gift, I painted a girl with pot and then radha krishna images...

MATERIALS REQUIRED
Outline of a drawing, glass, oil colour, glass colour, aluminium foil, brush, varnish, gold powder

PROCEDURE
Place the glass on the outline of the drawing. Make sure that the glass is of the same size as the drawing
Using black oil colour draw the outline of the drawing on to the glass. Use thinner to wipe when it goes wrong.
Allow it to dry for 24 hours. Once dried its hard to wipe, yu can only scratch which leaves a mark on the glass.
Once the outline is dry its easy to work
Colour the drawing with glass colours or oil colours. Glass colours are transparent.
Mix the gold powder in varnish and use the gold colour for jewels, to create a real effect of jewellery.
Glass colour dries quickly but oil colour takes more time. Once dried aluminium foil can be crushed and placed behind the glass colours. This brightens up the drawing.
When everything is over it may look clumpsy, but turn over and your finished drawing is ready to be framed.

SOAP CARVING

MATERIALS REQUIRED
Soap carving can be simple and inexpensive.
• A large bar of soap –
• A knife
• Pencil and paper for sketching
• Optional – Large tray to hold soap chips from carving
PROCEDURE
Unwrap the soap and let it dry for a day. Scrape off the lettering and any raised edges before beginning.
Begin with a simple design. Start with solid, basic shapes with simple cuts or extensions. Sketch your idea on paper first.
Place the design on your prepared bar of soap and trace it onto the soap using carbon paper or a sharp pencil.
With a little practice you’ll soon be ready to create designs of your own!
The actual carvings begin with rough cuts that remove the large parts of the soap not necessary for your design.
Place the soap on the table or tray.
Leave about 1/4" margin beyond your outlined sketch to allow for mistakes and more detailed work later.
Cut clear through the bar, removing excess soap all the way around.
Always cut away only small pieces or slices. Soap often breaks if cut in big chunks
After the first cuts, you may find it more comfortable to use the knife as if peeling a potato. Continue to stay 1/8" to 1/4" away from your sketch guidelines to allow for finer work later.
As you work, keep turning the soap, always keeping the shape of the piece in mind. Step back from time to time to look at the entire piece.
Watch your high points -- those that jut out farthest from the surface -- and your low points -- those farthest in.
Carve gradually from the high points toward the deepest cuts. Your knife point is useful for this.
Don't try to finish any one part in detail before another.
When the piece is almost finished, smooth rough edges with the knife’s edge and mark in details like eyes or ears with the knife tip.
If u like 2 colour ur work, use food colours rather than any other colour...It gives a very gud effect...